Any workplace - even those with only a small number of staff - will be enhanced by the addition of a well organised and properly equipped locker room or changing area.

M Series lockers provide an ideal solution, using an all steel construction to offer durable and high quality secure personal storage. Attention to strength in the primary area of doors, door frames and locking systems means that M Series delivers longer life and greater peace of mind. New designs of ventilation slots and card holders, combined with a hard wearing epoxy powder coated finish, give the M Series a stylish appearance to suit all environments. Doors are available in an extended range of standard colours with other colour options available on request.

Whatever your personal storage needs, the M Series of lockers has the answer. Ventilation Vents in the front, top and bottom of the locker frame improve air circulation whilst retaining an unpierced door surface.

• Locking systems: Wide range of optional fittings to choose from. Key operated dead locks with cardholder are fitted as standard,supplied with 2 keys. The locking mechanism locates behind the welded metal frame for enhanced security.
• Strong hinges: Semi concealed knuckle hinges are fitted to all our lockers. These are welded to the door for strength but rivetted to the door frame to allow replacement.
• Door Frame: Door frame is a welded construction with folded edges for safety and strength. Door channels to both sides provide maximum security.
• Reinforced Doors: Door edges are channel folded and then welded at the corners. Security and strength are further enhanced by a steel channel reinforcer welded to the full height of the door and locating within the channel fold.
• Nesting Lockers are available in nests of 1, 2 or 3. This makes installation easier and quicker in larger applications. Lockers are pre-drilled for further nesting once in location.
• Design Note: When calculating how many lockers will fit a given area, allow an additional 4mm space over the nominal width of each locker nest when units are butted together. Example: 12 single locker units, each 300mm wide: 300mm x 12 = 3600mm 11 x 4mm spacing = 44mm Length of locker run = 3644mm Initial unit Nest of 2 Nest of 3